Abstract:

A sequentially controlled valving system for the solid phase extraction (SPE) process on Lab-on-CD platform was designed, fabricated, and tested. The fabrication of the system was done with 3D printing technology. The centrifugal force provided the driving force needed for the fluidic control. The sample flow was driven from the central area of the disc to move outward to the edge by centrifugal force. The valving system was passive, and each valve could be switched at a certain rotating frequency. As a result, only one micro-motor was needed to drive the flow and control the valving system. This design is based on preliminary results of a significant amount of research which demonstrated that centrifugal instrumentation is highly reliable, significantly better than existing technologies and that sequential control of multiple valves and inward-pumping can be used for the proposed lab-on-a-CD system for separation and detection of oil detection. Related dataset is available under GRIIDC Unique Dataset Identifier (UDI) R6.x831.000:0003 (DOI: 10.7266/n7-g8hx-e455). This dataset supports the publication: Zhang, Y., Xiang, J., Wang, Y., Qiao, Z., & Wang, W. (2019). A 3D printed centrifugal microfluidic platform for solid-phase-extraction and fluorescent detection of spilled oil in water. Microfluidics, BioMEMS, and Medical Microsystems XVII. doi:10.1117/12.2515719

Suggested Citation:

Yong Zhang. 2019. Data collected to analyze the burst frequency of each valve tested to achieve accurate sequential control of micro-valving system.. Distributed by: Gulf of Mexico Research Initiative Information and Data Cooperative (GRIIDC), Harte Research Institute, Texas A&M University–Corpus Christi. doi:10.7266/N7HQ3XGW

Publications:

Zhang, Y., Xiang, J., Wang, Y., Qiao, Z., & Wang, W. (2019). A 3D printed centrifugal microfluidic platform for solid-phase-extraction and fluorescent detection of spilled oil in water. Microfluidics, BioMEMS, and Medical Microsystems XVII. doi:10.1117/12.2515719

Zhang, Y., Xiang, J., Wang, Y., Qiao, Z., & Wang, W. (2019). A 3D printed centrifugal microfluidic platform for spilled oil enrichment and detection based on solid phase extraction (SPE). Sensors and Actuators B: Chemical, 296, 126603. doi:10.1016/j.snb.2019.05.080

Wang, Y., Zhang, Y., Qiao, Z., & Wang, W. (2020). A 3D Printed Jet Mixer for Centrifugal Microfluidic Platforms. Micromachines, 11(7), 695. doi:10.3390/mi11070695

Purpose:

Burst frequency investigation of the mechanical pinch valves.

Data Parameters and Units:

The dataset consists of 4 PNG files showing schematics of various components of the overall instrument, and a word document showing a detailed methodology and integration of schematics.

Methods:

A detailed method is provided in the word document “Centrifugal platform with mechanical valving system” included in the dataset.

Instruments:

Detailed schematics are provided in the dataset.

Individual Files: